PDA

View Full Version : Internet connection under Parallels

ambarbansal
Aug 17, 2008, 10:54 AM
I am unable to connect to Internet in Windows XP. What should I do ?
I have tried lot of changes in config of network adapter (Default, Host, Wireless, Shared) , but none seem to work. What additional information is required ? Below is the log from the file that has most settings.

I think this problem occurred due to some update...(dont know which one).

Thanks,
Ambar
--------------- Host PC information ------------
---Primary OS version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386---End of Primary OS version
---Processor(s) info:
MacBook2,1
Number of CPU: 2
---End of Processor(s) info
---Memory info:
User memory: 874053632
---End of Memory info
Home directory: /Users/EktaTanyaMendhi
Display:
Session: local
Vendor:
Memory size: 1024
----------- End of Host PC information ---------
------------ Guest system configuration ------------
Current configuration (8b0b6b):
OS type: Windows XP (135)
Boot: c
Memory: 512 Mb
Memory block size: 2^10
Overall memory limit: 704
Monitor base: 0xec000000
Memory working set : current=0x20000, maximum=0x20000
Monitor host speed: 1406
Timer resolution: 1
Refresh rate: 40
Use opt cmos: 1
Time schema: 1
Timer adjusting schema: 0
Time period scale: 10000
Minamal timer tsc ticks: 500000
Halt tsc ticks ignore: 1
Portion slow timer: 4
Portion plan timer: 1
Acceleration level: 2
Smart application acceleration: 1
Smart kernel acceleration: enable=1, state=777
Smart kernel mode #2: 1
Fast stub parameter: 0xffffffff
Fast system call: 0
Fast system call #2: 1
Multi frame parameter: 4
Hack parameter: 4
Bit D remap: 1
Ignore interrupts parameter: 0
Minimal async time: 0
Enable write-back disk cache: 1
Strong checks: 0
Full LDT map: 1
VM was resumed: 0
PC speaker: 1
Screen resolution: 1194x642x32 (stretch: 1x1)
Vesa mode: 0x1fe
FDD0: type=12, insert=1, path=/Users/EktaTanyaMendhi/Library/Parallels/Microsoft Windows XP/unattended.fdd
IDE0: HDD, type=1DE, cyl=65016, head=16, spt=63, path=/Users/EktaTanyaMendhi/Library/Parallels/Microsoft Windows XP/winxp.hdd
IDE1: CD-ROM, type=CD, insert=1 path=Default CD/DVD-ROM
Network: type=RTL8029(AS), mem=0, port=0x300, irq=3 mac=00359dff9d14
Sound: 1
PCI: devices=0x61
-------- End of guest system configuration ---------
------------------- Print buffer -------------------
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
[Time elapsed from VM start : 4.920 second(s)]
E054.01.001
---------------- End of print buffer ---------------
-------------- Guest processor state ---------------
Inhibit Mask=0

CS=0008 [0000FFFF 00CF9B00] V=1
SS=0010 [0000FFFF 00CF9300] V=1
DS=0023 [0000FFFF 00CFF300] V=1
ES=0023 [0000FFFF 00CFF300] V=1
FS=0030 [F0000001 FFC093DF] V=1
GS=0000 [0000FFFF 00009300] V=1

EAX=0000DEF5 EBX=FFDFF000 ECX=FFDFFC50 EDX=80010031
ESI=80558E20 EDI=80559080 EBP=FFDFF980 ESP=805502F8
EIP=806F372A EFLAGS=00000217

LDTR=0000 [00000000 00000000] V=0
TR=0028 [200020AB 80008B04] V=1
GDTR=8003F000(000003FF)
IDTR=8003F400(000007FF)

CR0=8001003B
CR1=00000000
CR2=7C90361D
CR3=00039000
CR4=00000698

0008.806F372A C3 ret

0010.805502F8 01D0 822D 1038 8225 0100 0000 0324 8055 F048 8216
----------- End of guest processor state -----------
Problem report - End
John@Parallels
Aug 18, 2008, 04:34 AM
put here
ifconfig -a from Mac OS
and
upconfig /all from Windows
ambarbansal
Aug 18, 2008, 03:30 PM
Thanks John. Could you direct how I could get the information you requested?
John@Parallels
Aug 20, 2008, 08:06 AM
in Mac OS
open Terminal from Applications/Utilities
ifconfig -a
in Windows Start -Run cmd
ipconfig /all
ambarbansal
Aug 24, 2008, 12:30 AM
Windows IP Configuration

Host Name . . . . . . . . . . . . : ektatanyamea4a1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : busy4.on.cogeco.ca

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : busy4.on.cogeco.ca
Description . . . . . . . . . . . : Parallels Network Adapter
Physical Address. . . . . . . . . : 00-35-9D-FF-9D-14
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
Lease Obtained. . . . . . . . . . : August 24, 2008 1:19:50 AM
Lease Expires . . . . . . . . . . : August 24, 2008 2:19:14 AM
ambarbansal
Aug 24, 2008, 12:32 AM
MAC : IFCONFIG -a

Last login: Sat Aug 23 21:09:40 on console
Welcome to Darwin!
ekta-tanya-mendhis-computer:~ EktaTanyaMendhi$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:19:e3:42:dc:0a
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:b3ff:feb4:111d%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.101 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1c:b3:b4:11:1d
media: autoselect status: active
supported media: autoselect
wlt1: flags=41<UP,RUNNING> mtu 1500
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:1c:b3:ff:fe:82:90:5c
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICA ST> mtu 1500
inet6 fe80::201:23ff:fe45:6789%en2 prefixlen 64 scopeid 0x8
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:01:23:45:67:89
media: autoselect status: active
supported media: autoselect
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICA ST> mtu 1500
inet6 fe80::210:32ff:fe54:7698%en3 prefixlen 64 scopeid 0x9
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:10:32:54:76:98
media: autoselect status: active
supported media: autoselect
ekta-tanya-mendhis-computer:~ EktaTanyaMendhi$
John@Parallels
Aug 24, 2008, 02:15 AM
Switch to Shared Networking
In Windows -
In NIC properties set IP address o be assigned by DHCP, and DNS servers too

in Start -run -cmd
ipconig /release
ipconfig /renew
ambarbansal
Aug 24, 2008, 08:22 PM
Hi, It doesn't work still.

Thanks,
Ambar

The Apple config download is:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:19:e3:42:dc:0a
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:b3ff:feb4:111d%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.101 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1c:b3:b4:11:1d
media: autoselect status: active
supported media: autoselect
wlt1: flags=41<UP,RUNNING> mtu 1500
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:1c:b3:ff:fe:82:90:5c
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICA ST> mtu 1500
inet6 fe80::201:23ff:fe45:6789%en2 prefixlen 64 scopeid 0x8
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:01:23:45:67:89
media: autoselect status: active
supported media: autoselect
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICA ST> mtu 1500
inet6 fe80::210:32ff:fe54:7698%en3 prefixlen 64 scopeid 0x9
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:10:32:54:76:98
media: autoselect status: active
supported media: autoselect

------------------------
Windows download is:
Windows IP Configuration

Host Name . . . . . . . . . . . . : ektatanyamea4a1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Parallels Network Adapter
Physical Address. . . . . . . . . : 00-35-9D-FF-9D-14
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 10.211.55.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.211.55.1
DHCP Server . . . . . . . . . . . : 10.211.55.1
DNS Servers . . . . . . . . . . . : 10.211.55.1
Lease Obtained. . . . . . . . . . : August 24, 2008 7:02:49 PM
Lease Expires . . . . . . . . . . : August 31, 2008 7:02:49 PM
John@Parallels
Aug 25, 2008, 05:41 AM
Do you have antivirus in Windows?
Can you access Internet from Firefox - download it from mac OS side and install in Windows, if you can , than probably antivirus or third party Firewall is blocking access
ambarbansal
Aug 25, 2008, 01:25 PM
Yes, I do have anti-virus in windows. But it has always been there. Somehow the internet access in Windows stopped after a software update. I am not clear what you are suggesting:
(1) Try accessing internet from firefox browser in windows with current anti-virus / firewall OR
(2) Shut down anti-virus in windows and access with existing internet explorer

Thanks,
Ambar
macrg
Aug 26, 2008, 08:35 AM
Ambar:
I have had the same problem on both my Mac Pro and my Macbook Pro. They both happened after the last critical update of XP was done (the one after SP3). My solution was to do a Windows System Restore to a point in time before the last update on both computers and to turn off the automatic update feature in XP. Not a good solution but at least my computers are both working again. I will not try another XP update until Parallels has a new update.
John@Parallels
Aug 26, 2008, 08:37 AM
The problem is not to disable antivirus, but to correctly set up it,
I hope antivirus software support has correct instaructions
macrg
Aug 26, 2008, 08:46 AM
Simply saying that one should set up the antivirus "properly" is not very helpful. I use Webroot and used a standard setup which has always worked before.
John@Parallels
Aug 26, 2008, 08:58 AM
I do not know settings for webroot, but it seems exatcly it is blocking IE
ambarbansal
Aug 28, 2008, 09:16 PM
Do you think internet access will work if I switch off anti-virus in windows?
John@Parallels
Aug 28, 2008, 11:10 PM
Probably the best way is to check, you can always install it back, if it fails