Is 10.4.10 compatible with PD 3.0?

Jun 20, 2007, 07:40 PM #1
Stevamundo Senior Member Join: Sep 2006 Posts: 417	Is 10.4.10 compatible with PD 3.0? Just today Apple came up with their Tiger update of 10.4.10. Is it compatible with PD 3.0?
Reply

Jun 20, 2007, 07:47 PM #2
snodman Member Join: Dec 2006 Posts: 53	It is still working fine for me after installing the new Mac OS X 10.4.10 update.
Reply

Jun 20, 2007, 09:08 PM #3
Purplish Senior Member Join: Oct 2006 Posts: 540	I have upgraded to 10.4.10 and Parallels and my USB devices still work.
Reply

Jun 21, 2007, 09:25 AM #4
Leonard Member Join: May 2007 Posts: 51	No problems since upgrading to 10.4.10 here either. __________________ --Larry MBP 2.16Ghz, 3GB, OS X 10.5.4 VM: Windows XP Pro SP3, Windows Vista Enterprise SP1, Open Solaris, Ubuntu 8.04, Solaris 10 Parallels 3.0 5624
Reply

Jun 21, 2007, 09:37 AM #5
Ankou Guest Join: Posts: n/a	If you are a happy owner of PD 3.0, it is safe to upgrade to 10.4.10 now. We are not aware of any compatibility issues. If you are a happy owner of PD 2.5 (both builds 3188 and 3212), it is not recommended to update to 10.4.10 now if your production environment relies on USB support in PD. There’s a known compatibility problem with Parallels Desktop build 3188 and 3212 USB implementation and Mac OS X 10.4.10. We are issuing and update for 2.5 within next two days that fixes the compatibility problem
Reply

Jun 21, 2007, 09:37 AM

Ankou
Guest

Join:
Posts: n/a

If you are a happy owner of PD 3.0, it is safe to upgrade to 10.4.10 now. We are not aware of any compatibility issues.

If you are a happy owner of PD 2.5 (both builds 3188 and 3212), it is not recommended to update to 10.4.10 now if your production environment relies on USB support in PD. There’s a known compatibility problem with Parallels Desktop build 3188 and 3212 USB implementation and Mac OS X 10.4.10. We are issuing and update for 2.5 within next two days that fixes the compatibility problem

Jun 21, 2007, 09:47 AM

dkp
Senior Member

Join: May 2006
Posts: 1,415

Quote:

Originally Posted by Ankou

It might be a good idea to make this a sticky note on the Mac forums until the update for 2.5 is out or surely there will be problems and more rants.

Jun 21, 2007, 03:45 PM

John Howard
Senior Member

Join: Jun 2006
Posts: 134

Quote:

Originally Posted by Ankou

Appreciate the heads up. I am using PD build 3212 without any problems and wish to keep it that way. So while I normally update my Mac OS fairly quickly, I will wait a few days this time so I can update my PD first.

Jun 21, 2007, 10:01 PM

John Howard
Senior Member

Join: Jun 2006
Posts: 134

Quote:

Originally Posted by Ankou

We are issuing and update for 2.5 within next two days that fixes the compatibility problem

Where will the update be posted?

Jun 22, 2007, 07:07 PM #9
Lago di Cuba Junior Member Join: Jun 2007 Posts: 12	I "upgraded" from 3212 to 4128, both running 10.4.10. USB does NOT work in 4128 -- same message appears "device is in use by another application" -- it's not.
Reply

Jun 22, 2007, 07:09 PM #10
Lago di Cuba Junior Member Join: Jun 2007 Posts: 12	I "upgraded" from 3212 to 4128, both running 10.4.10. USB does NOT work in 4128 -- same message appears "device is in use by another application", even though that is not correct.
Reply

Jun 22, 2007, 09:02 PM #11
Purplish Senior Member Join: Oct 2006 Posts: 540	Lago, I have found USB to work well in 4128 and 10.4.10. Perhaps if you could be specific about the USB device and your Hardware configuration we could help you get it working. There are, no doubt, some devices which may not work, but most we can help you with.
Reply

Jun 22, 2007, 09:11 PM #12
Lago di Cuba Junior Member Join: Jun 2007 Posts: 12	USB in P3.0 with 10.4.10 The USB device which, so far, won't work is the IrDa Bridge for the Polar Heart Watch. It's a USB device, not USB2. I have installed the Polar driver, which says it's for WIN 2000 and I suspect that's the problem. Polar makes a USB2 interface which is supposed to be Vista compatible -- I've just ordered one. The Polar website says it uses native Vista IR drivers-- we'll see! The other device is a Durametric ODBII diagnostic tool for Porsche. That does seem to work OK in my current configuration. Thanks for the quick attention -- if you have any suggestion about how I might get the USB1 Polar thing working, I'm interested. If not, we can just wait and see if the new Polar thingie does the trick. Thanks, again.
Reply

Jun 22, 2007, 09:11 PM

#12

Lago di Cuba
Junior Member

Join: Jun 2007
Posts: 12

USB in P3.0 with 10.4.10

The USB device which, so far, won't work is the IrDa Bridge for the Polar Heart Watch. It's a USB device, not USB2. I have installed the Polar driver, which says it's for WIN 2000 and I suspect that's the problem.

Polar makes a USB2 interface which is supposed to be Vista compatible -- I've just ordered one. The Polar website says it uses native Vista IR drivers-- we'll see!

The other device is a Durametric ODBII diagnostic tool for Porsche. That does seem to work OK in my current configuration.

Thanks for the quick attention -- if you have any suggestion about how I might get the USB1 Polar thing working, I'm interested. If not, we can just wait and see if the new Polar thingie does the trick.

Thanks, again.

Post Reply

« Previous Thread | Next Thread »

Search this thread	Forum jump
Advanced Search

Thread tools	Display modes
Printable Version Email this Page	Linear Mode Hybrid Mode Threaded Mode

Parallels Technology Network

Is 10.4.10 compatible with PD 3.0?