Parallels11-Tacx Software-USB issue

Discussion in 'Windows Virtual Machine' started by KarstenH1, Dec 12, 2015.

  1. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    after a upgrade to Parallels11 I have a big problem with my Tacx Trainingssoftware.
    If I plugged in the USB cable from the Tacx interface I it connects but it will need a
    longer time as under Parallels8. In the moment I try to calibrate the brake with the
    Tacx TTS4 software I can start the process but I get directly a euro massage from
    the programm.
    On my old system with Parallels8 all run well.

    Please help me with the issue.

    Thanks Kail
     
  2. PaulChristopher@Parallels

    PaulChristopher@Parallels Product Expert Staff Member

    Messages:
    3,158
    Hi, Please follow the steps mentioned below to fix the issue USB issue.
    1. Connect USB device to virtual machine and create problem report (Actions > Send Technical Data) and save the ID.
    2. Shut down your virtual machine.
    3. Unplug all possible USB devices from host.
    4. Turn off shared camera, shared Bluetooth, shared printers:
    - Open virtual machine settings ( http://kb.parallels.com/117287 ) > Hardware > USB & Bluetooth > Be sure that Automatic sharing of Web cameras and Bluetooth devices is unchecked.
    5. Go to the Boot Order tab > Boot Flags and type the following flags:
    devices.usb.keyboard=0; devices.usb.mouse=0
    6. Start virtual machine and check how it works.
     
  3. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hi, thank you for the fast answer. I need further support with your instruction.
    Under help->send technical data I can create a list but where I can find the ID from the device?
     
  4. 4ndrea R3

    4ndrea R3 Bit poster

    Messages:
    9
    After you send data you receive a Support ID...
     
  5. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    the data are sent.
    I changed the parameters for the boot but it don't work.

    Thanks for support Kail
     
  6. PaulChristopher@Parallels

    PaulChristopher@Parallels Product Expert Staff Member

    Messages:
    3,158
    Dear all, we're currently working on it with our Development. Unfortunately we do not have ETA for the fix, it has been prioritized appropriately and you can track the changes in the product at http://kb.parallels.com/123410
     
  7. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    I can't find an update for Parallels11 must I wait till next year?
    We have a great Problem with USB and Parallels11and we hope
    We could use our new Hard- and Softwore during Christmas.

    Please give me an current status

    Kail
     
  8. ManojK@Parallels

    ManojK@Parallels Parallels Support

    Messages:
    367
    We have addressed workaround for the issue in this article. Please check and let us know.
     
  9. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    the last post was not the solution for my problem.
    I need asap. help please. In the moment I can't use the new software Parallels11. If you can
    not find a way to fix the bug I must give you the software back and must search for an other
    program to work fine with:
    OS 10.11.2
    Windows10
    Tacx Trainingssoftware TTS4
    Please let me know what we can do?

    Thanks Kail
     
  10. Ram@Parallels

    Ram@Parallels Parallels Support

    Messages:
    779
    Please update Parallels Desktop to the latest build 11.1.1 (32408) & check if the issue still persisting. You can update to the latest build as suggested in this article. Latest version always available here: http://www.parallels.com/directdownload/pd11/ Please note that Parallels Tools also needs to be updated (Actions > Update Parallels Tools).
     
  11. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    I tested the new build but my problem with the Tacx break calibration is not fixed. I am very frustrated under/with
    parallels8 I had no problems with my equipment. Sorry for the bad news but I need help.

    Thanks Kail
     
  12. ManojK@Parallels

    ManojK@Parallels Parallels Support

    Messages:
    367
    In order to investigate the issue further we need you to submit a Problem Report and provide us with its ID number. Please follow this KB article to submit Problem Report:

    http://kb.parallels.com/9058

    NOTE: Please submit a report while reproducing the issue and provide us with generated ID number in your reply. We will not be able to locate your Problem Report on the server without having its ID number.
     
  13. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    I sent you the data with ID 83407580 on Dez. 13th.
    Please check and let me know if there is mistake.

    Thanks Karsten
     
  14. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    could you find my data and perhaps the reason for the issue?

    Thanks Kail
     
  15. ManojK@Parallels

    ManojK@Parallels Parallels Support

    Messages:
    367
    As I checked, the Problem Report ID is for an older build and I request you to update to the latest build by downloading and installing from the this link.
     
  16. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    that's right and I done it, please see my post form Dez. 29.. It was the same issue with the new build.
    If you need a new report from the current version I can create and send it if you need.
    Please keep me informe
    Thanks Karsten
     
  17. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    could you give me a current stand to my issue please.

    Thanks Kail
     
  18. ManojK@Parallels

    ManojK@Parallels Parallels Support

    Messages:
    367
    Please contact us in our tollfree number: +1 888-811-2489 so that we can look into the issue directly and assist you further.
     
  19. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    thank you for the response but I think the call is not so easy and
    free for me because I am in Germany located. If there a other way
    to fix the issue?

    Thanks for your support

    Kail
     
  20. KarstenH1

    KarstenH1 Member

    Messages:
    20
    Hello,

    what is the next step with our problem?
    Could you call me?
    Could you give me further Information what I can do?
    I repeat, the issue is only with Version 11. If I use the other System with Parallels 8
    all is working well so I can say it must be a issue with the new Parallels.
    Thanks Kail
     

Share This Page