I have a problem within XP on Parallels 4 on my iMac that Internet Explorer 8 won't display any pages. It seems to send out the request OK but then says the page can't be displayed. Firefox and Safari both work OK within XP. Any ideas? Under XP if I run ipconfig I get ==================== Server: Unknown Address: 10.211.55.1 Nicht autorisierte Antwort: (unauthorised answer) Name: ipconfig Addresses: 62.157.140.133, 80.156.86.78 From the Mac ========= kim-booths-imac:~ berlinbno$ ifconfig -a lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:1e:52:ff:fe:49:77:ba media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 ether 00:1c:b3:7c:5b:c8 media: autoselect (<unknown type>) status: inactive supported media: autoselect en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21b:63ff:feba:50a7%en0 prefixlen 64 scopeid 0x6 inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255 ether 00:1b:63:ba:50:a7 media: autoselect (100baseTX <full-duplex,flow-control>) status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1e:52:d3:38:50 media: autoselect status: inactive supported media: none autoselect 10baseT/UTP <half-duplex> en8: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21c:42ff:fe00:8%en8 prefixlen 64 scopeid 0x8 inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255 ether 00:1c:42:00:00:08 media: autoselect status: active supported media: autoselect en9: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21c:42ff:fe00:9%en9 prefixlen 64 scopeid 0x9 inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255 ether 00:1c:42:00:00:09 media: autoselect status: active supported media: autoselect
