Getting Crazy no Internet Connection

Discussion in 'Parallels Website and Forum' started by mixingroomberlin, Aug 12, 2008.

  1. mixingroomberlin

    mixingroomberlin

    Messages:
    4
    So I have tried every tag on your website and can not get internett acces .
    We have here:

    Modellname: Mac Pro
    Modell-Identifizierung: MacPro1,1
    Prozessortyp: Dual-Core Intel Xeon
    Prozessorgeschwindigkeit: 2.66 GHz
    Anzahl der Prozessoren: 2
    Gesamtzahl der Kerne: 4
    L2-Cache (pro Prozessor): 4 MB
    Speicher: 4 GB
    Busgeschwindigkeit: 1.33 GHz
    Boot-ROM-Version: MP11.005C.B08
    SMC Version: 1.7f10
    Seriennummer: CK6320KTUQ2

    Thanks in advance
    Andreas
     
  2. John@Parallels

    John@Parallels

    Messages:
    6,360
    What is Network settings in VM?
    Bridged or Shared Networking
    What is ifconfig -a from Mac OS (in Terminal)
    and ipconfig /all in Windows?
     
  3. mixingroomberlin

    mixingroomberlin

    Messages:
    4
    --Last login: Wed Aug 13 12:23:48 on console
    Welcome to Darwin!
    localhost:~ admin$ iconfig
    -bash: iconfig: command not found
    localhost:~ admin$ ifconfig
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0<> mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:17:f2:00:21:b0
    media: autoselect status: inactive
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::217:f2ff:fe00:21b1%en1 prefixlen 64 scopeid 0x5
    inet 192.168.1.33 netmask 0xffffff00 broadcast 192.168.1.255
    inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
    ether 00:17:f2:00:21:b1
    media: autoselect (100baseTX <full-duplex,flow-control>) status: active
    supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
    fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:16:cb:ff:fe:6b:df:d2
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>
    en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
    ether 00:1c:42:00:00:00
    media: autoselect status: active
    supported media: autoselect
    en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
    inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
    ether 00:1c:42:00:00:01
    media: autoselect status: active
    supported media: autoselect
    localhost:~ admin$

    http://www.file-upload.net/view-1040720/Screenshot_1.png.html
    http://www.file-upload.net/view-1040739/Screenshot_2.png.html

    Hope that Helps I have done Screenshots....

    Andreas
     
  4. John@Parallels

    John@Parallels

    Messages:
    6,360
    Please install Ethernet NIC driver as bellow and restart VM
    1. Connect Parallels Tools CD image (vmtools.iso) to VM. You can find

    Parallels Tools CD image at the /Library/Parallels/Tools folder.



    2. In the Windows Vista Start menu, go to Control Panel -> System -> Device Manager and select

    Network Adapters -> Parallels Network Adapter in the left panel. Double click it.

    3. Choose Driver -> Update Driver... -> Browse for driver software on your computer. Point the path to your CD.

    4. When Windows asks you what driver to use, you should point to:

    Drivers/Network/RTL8029/Win2000.XP.ME.2003 on your virtual CD-ROM.
     
  5. mixingroomberlin

    mixingroomberlin

    Messages:
    4
    Thank you very much this helped the driver is working in Windows.
    But one thing I am getting crazy about I can not Coppy and paste between MS WIN an MAC OSX.

    Do I nedd another software to do so?

    Andreas
     
  6. John@Parallels

    John@Parallels

    Messages:
    6,360
    Parallels Desktop - Actions -Install Parallels Tools
     
  7. mixingroomberlin

    mixingroomberlin

    Messages:
    4
    Thanks for all P-Tools is Grey I still have a Demo Version.
    To this point I am happy and I would like to buy a licence want to see taht copy and paste is running.
     

Share This Page