I am running Parallels Destktop 14 for Mac Pro Edition (14.0.1). I cannot get bridged networking to work with MacOS (High Sierra) and Linux (Mint/Ubuntu). Here is the name -a information from the Linux system: Linux mint2 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux As soon as I switch to "Shared" networking mode, the network interface gets correctly configured, and I can get in and out. I do however need bridged networking in order to access a device that does not work with shared networking. I've tried the trouble shooting tips from this thread without success: https://forum.parallels.com/threads/linux-ubuntu-16-04-bridged-network-not-working.340386/ All virtual machines have the latest version of the Parallels Tools installed. Here is the output of "ifconfig -a" from the Linux system using shared networking: $ ifconfig -a enp0s5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.211.55.37 netmask 255.255.255.0 broadcast 10.211.55.255 inet6 fe80::21c:42ff:fe86:3466 prefixlen 64 scopeid 0x20<link> inet6 fdb2:2c26:f4e4:0:21c:42ff:fe86:3466 prefixlen 64 scopeid 0x0<global> ether 00:1c:42:86:34:66 txqueuelen 1000 (Ethernet) RX packets 1633 bytes 440268 (440.2 KB) RX errors 0 dropped 2 overruns 0 frame 0 TX packets 545 bytes 387496 (387.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 1174 bytes 100855 (100.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1174 bytes 100855 (100.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And here is is with bridged networking: $ ifconfig -a enp0s5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::21c:42ff:fe86:3466 prefixlen 64 scopeid 0x20<link> inet6 fd00:aaaa::21c:42ff:fe86:3466 prefixlen 64 scopeid 0x0<global> ether 00:1c:42:86:34:66 txqueuelen 1000 (Ethernet) RX packets 1675 bytes 456352 (456.3 KB) RX errors 0 dropped 2 overruns 0 frame 0 TX packets 589 bytes 402414 (402.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 1202 bytes 104201 (104.2 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1202 bytes 104201 (104.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I also just tried the same test on an old Win7 vm with the same results: It works with shared, but not with bridged networking. In Parallels Desktop Preferences>Networking, I see entries for both shared and host only, but not for bridged - there does not seem to be a way to actually upload an image, so my description needs to suffice. Interestingly enough, a virtual machine using VirtualBox on the same system does allow bridged networking. What can I do to make this work in Parallels as well?
