Completely blank windows ipconfig

[BrianHV]

I'm totally stumped by this. I sent the below to Parallels support who suggested trying bridged networking. That didn't help, so I'm hoping to get some more eyes on the problem.

Using shared networking, the Windows 2003 Server guest is not able to use the network. It does not even acquire an IP.

In the OSX Network control panel, there is an active "Parallels Host-Guest" adapter with an IP of 10.37.129.2. There is also an active "Parallels NAT" adapter with an IP of 10.211.55.2. I am connected to the internet through Built-in Ethernet, and mac-side applications connect successfully.

Parallels is set to use Shared Networking.

In Windows 2003 Server, the network connection appears as "Parallels Network Adapter" and claims to be connected at 1.0Gbps. However, under "Support," the connection status fields are blank. Clicking repair fails immediately with the message:

Windows could not finish repairing the problem because the following action cannot be completed:
Failed to query TCP/IP settings of the connection. Cannot proceed.

Pressing the "Details" button shows an empty page.

Running ipconfig is also not useful:

C:\Documents and Settings\brianhv>ipconfig /all

Windows IP Configuration


C:\Documents and Settings\brianhv>

Attempts to access an internet site fail immediately:

C:\Documents and Settings\brianhv>telnet google.com 80
Connecting To google.com...Could not open connection to the host, on port 80: Connect failed

If anyone has any ideas I would love to hear them.

 

[BrianHV]

Well, as is typical after spending a day trying to figure something out, I solved it 10 minutes after posting. I followed the instructions by constant in this post: http://forum.parallels.com/thread12271.html#2

Uninstalling the network card then reinstalling Parallels Tools seems to have gotten me online using shared networking.