I have a problem within XP on Parallels 4 on my iMac that Internet Explorer 8 won't display any pages. It seems to send out the request OK but then says the page can't be displayed. Firefox and Safari both work OK within XP.
Any ideas?
Under XP if I run ipconfig I get
====================
Server: Unknown
Address: 10.211.55.1
Nicht autorisierte Antwort: (unauthorised answer)
Name: ipconfig
Addresses: 62.157.140.133, 80.156.86.78
From the Mac
=========
kim-booths-imac:~ berlinbno$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1e:52:ff:fe:49:77:ba
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:1c:b3:7c:5b:c8
media: autoselect (<unknown type>) status: inactive
supported media: autoselect
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:feba:50a7%en0 prefixlen 64 scopeid 0x6
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:1b:63:ba:50:a7
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1e:52:d3:38:50
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
en8: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:8%en8 prefixlen 64 scopeid 0x8
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:08
media: autoselect status: active
supported media: autoselect
en9: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:9%en9 prefixlen 64 scopeid 0x9
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:09
media: autoselect status: active
supported media: autoselect
Any ideas?
Under XP if I run ipconfig I get
====================
Server: Unknown
Address: 10.211.55.1
Nicht autorisierte Antwort: (unauthorised answer)
Name: ipconfig
Addresses: 62.157.140.133, 80.156.86.78
From the Mac
=========
kim-booths-imac:~ berlinbno$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1e:52:ff:fe:49:77:ba
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:1c:b3:7c:5b:c8
media: autoselect (<unknown type>) status: inactive
supported media: autoselect
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21b:63ff:feba:50a7%en0 prefixlen 64 scopeid 0x6
inet 192.168.2.101 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:1b:63:ba:50:a7
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en6: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1e:52:d3:38:50
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
en8: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:8%en8 prefixlen 64 scopeid 0x8
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:08
media: autoselect status: active
supported media: autoselect
en9: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:9%en9 prefixlen 64 scopeid 0x9
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:09
media: autoselect status: active
supported media: autoselect