Internet connection failed

[Roch]

Problem: on the Mac side internet connection works fine, but IE says it can't access the internet.

Mac OS X 10.5.4
Microsoft Windows XP Professional SP2
Parallels Desktop 3.0 for Mac Build 5608
Network Adapter 1: Enabled OK, Connect cable at startup OK, Bridged Ethernet

Couple of days ago computer was relocated.

==========
ipconfig /all

Konfiguracja IP systemu Windows

Nazwa hosta . . . . . . . . . . . : dm5347
Sufiks podstawowej domeny DNS . . . . . . :
Typ wezla . . . . . . . . . . . . : Nieznany [unknown]
Routing IP wlaczony . . . . . . . : Nie [no]
Serwer WINS Proxy wlaczony. . . . : Nie [no]

Karta Ethernet Polaczenie lokalne:

Sufiks DNS konkretnego polaczenia :
Opis . . . . . . . . . . . . . . : Parallels Network Adapter
Adres fizyczny. . . . . . . . . . : 00-1C-42-62-53-5E
DHCP wlaczone . . . . . . . . . . : Tak [yes]
Autokonfiguracja wlaczona . . . . : Tak [yes]
Adres IP autokonfiguracji . . . . : 169.254.25.49
Maska podsieci. . . . . . . . . . : 255.255.0.0
Brama domyslna. . . . . . . . . . :
==========
ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:16:cb:9c:66:10
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.12 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:19:e3:0a:39:2b
media: autoselect status: active
supported media: autoselect
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:17:f2:ff:fe:67:1c:6a
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.3 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 10.211.55.4 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect

Regards,
Roch

 

[John@Parallels]

Use Shared Networking or assign in VM IP from following range
192.168.1.x

 

[Roch]

I switched to Shared Networking and... it works now - I got access to Internet and immediately my update-hungry Kaspersky was loading all his stuff for 20 minutes It worked with IE as well.
Thank you very much for help!
Regards, Roch