Kernel panic

S

sbrehme

Bit poster
Hi all,

using the latest version of parallels, I always get a kernel panic. See log. Using build 1970, everything is fine again. I'm using MacBook Pro, 2.16 GHz, 2GB Ram. Any hints?

panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00da7000, CR4: 0x000006e0
EAX: 0x038b0000, EBX: 0x36f1ce34, ECX: 0x36f1ce48, EDX: 0xffff0f16
CR2: 0x00000000, EBP: 0x2543be48, ESI: 0x03d14fc4, EDI: 0x00000001
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x05c90010

Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2543bc68 : 0x128d08 (0x3cb134 0x2543bc8c 0x131de5 0x0)
0x2543bca8 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x2543bdb8 : 0x19ada4 (0x2543bdc4 0xe 0x25430048 0x190010)
0x2543be48 : 0x22fdc5 (0x36f1ce00 0x14 0x6 0x0)
0x2543bf58 : 0x21d53a (0x36f1ce00 0x36f1ce00 0x44507c 0x1a3010)
0x2543bf98 : 0x203df7 (0x3a18140 0x2543bfdc 0x2543bfc8 0x1a2f8d)
0x2543bfc8 : 0x19ac1c (0x0 0x0 0x19e0b5 0x61a6dc8) Backtrace terminated-invalid frame pointer 0x0

Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

Model: MacBookPro1,2, BootROM MBP12.0061.B03, 2 processors, Intel Core Duo, 2.16 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), 0.1.31.1
Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: Parallels Host-Guest, Ethernet, en2
Network Service: Parallels NAT, Ethernet, en3
Serial ATA Device: FUJITSU MHV2120BHPL, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-846
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
Model: MacBookPro1,2, BootROM MBP12.0061.B03, 2 processors, Intel Core Duo, 2.16 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), 0.1.31.1
Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: Parallels Host-Guest, Ethernet, en2
Network Service: Parallels NAT, Ethernet, en3
Serial ATA Device: FUJITSU MHV2120BHPL, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-846
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
 
have you

a) applied 10.4.9 update recently ?
b) run a disk utility check and repair of permissions ?
c) run a mem test app (such as "rember" having it close all apps including finder) ?

A page fault indicates a memory error. Even tho this wasnt occuring in 1970, doesnt mean that it was Parallels.
 
Yes, 10.4.9. is installed. I've run Cocktail but still have the problem. Same to my two other laptops (I habe 3 licenses). Same crash log. So I would say it is not a problem of memory.
 
kernal panics

I was having kernal panics a few days ago, then it stopped for a few days, and now it's back with a vengence. I can't find any crash log in ---> library ---> logs ---> crashreporter

It's very bad now. I sent a message 3 days ago to tech support but no response so far.

It would seem really unlikely that it's a memory problem as I only have these crashes under parallels

I've run a memory test with no problems. (although I read somewhere that the Mac Pro memory can't be tested with normal means)

I repaired disk permissions.

Did a disk utility drive repair.

I still get the kernal panics (screen of death with the Chinese lettering...)

machine: intel 2.66 quad / 3 GB ram
 
Ok - is that all? I have send a support request 10 days ago and still there is no reply.
These kernel panics crashes the whole computer! If there is no help at all, I will try vmware - at least the support works fine there :-(
 
I am having the same problems. Simply launching Desktop causes a kernel panic / crash!
Infuriating, to say the least!
Never had any problems like this before with any other apps.
 
You must log in or register to reply here.
Back
Top