Trouble Seeing External BD Burner

L

lucas cheadle

Bit poster
Macbook Pro 2.5 GHz, 4 GB RAM
Sony Vegas/DVD Architect Pro 5
Attempting to burn a BluRay DVD with LG Super Multi Blue BE06 external BD burner, via USB. Burner doesn't show up in the authoring program. I've been to the configuration editor and tried all the USB options to no avail. When I open and close the burner tray an OSX finder window opens to tell me about how blank a disk is. This means that Windows isn't recognizing the burner, right? Using Parallels means dedicating USB ports to Windows or OSX, not both, right?
I could use some troubleshooting tips. Thanks
 
Also having no luck...

I am having problems with my LG BE06, too. Specific model name is: BE06LU11. Firmware YP01
And yes. I activated it from Devices USB. Contacted LG and they said I have the most recent firmware.

Sometimes I get the error: "Unable to open device/file: HL-DT-ST BD-RE BE06LU11"
It always asks to insert disk into Drive E: even when there is one in there.
When I try to launch that crappy CyberLink HiDef Suite it says the drive can't be found.

Any other ideas? Does the LaCie D2 Blu-Ray burner work because this piece of crap LG is going back to Newegg.
I'm running Parallels 3.0 (Build 5608) | Win XP Home | 8 Core MacPro
 
Lg Be06lu11

Yes. The macintosh recognizes it in OS X 10.4.11. I haven't tried a Blu-Ray but it can spool up a standard CD or DVD in OS X. Nothing at all spools up in the Win XP side.
I'll have to get back to the computer to try your suggestion. I'm assuming you are talking about Parallels Configuration Editor. I get there by pausing the Windows startup and select it from inside there, correct?
 
No dice. It freezes Windows up. I can disconnect the drive down at the bottom of the screen (the parallels screen) and the computer responds again. The minute I connect the drive back, Windows quits responding. I'm installing the Parallels v4.0 upgrade now and will see if I have any more luck.
 
Screw it.
Upgraded to 4 and said the install failed.
Windows will still boot, but still no response if I activate the Blu-Ray burner.
I sent the burner back. This is just absolutely ridiculous.
 
FWIW - I brought in another LG burner just to see if I had a defective unit. This one also works fine on a Windows machine (Win XP Pro Version 2002 Service Pack 2) on a Dell Precision PWS 390. It freezes up in Parallels on Win XP Home.

If it will help, I took screenshots of the Devices panel in the Control Panel - 22 different windows as I went into the Blu-Ray device. I can post the contents here.

I seem to be involved in two similarly running threads about Blu-Ray burner not seen in Parallels. This one here and this one: http://forum.parallels.com/showthread.php?p=132750&posted=1#post132750
 
You must log in or register to reply here.
Back
Top