2 Physical NIC's (Network Cards) in Server 2008 R2 Guest

2 Physical NIC's (Network Cards) in Server 2008 R2 Guest Hello All,

Have a bit of a problem. I have 2 realtek NICs and am having problems with DHCP.

I set up accordingly, shows 2 different network cards installed under network manager but for some reason they get served by the same router.

IE:

LAN 1:
192.168.0.1

LAN 2:
192.168.0.2

In theory it should look like:

LAN 1: 192.168.0.1

LAN 2: 10.0.1.4

I have 2 physical routers but no matter what parallels maps the 2 network cards to through the same NIC so I am unable to access my second network.

I find this really hard to explain but hopefully someones came across it!

Please Help

 

Which Network Mode are you running?

 

Hey There,

Bridged mode for both of them.

 

Hi, the configuration you described is supported.

please configure card 1 to be bridged to host interface 1, and card 2 to card 2. Then reboot the VM and if this doesn't help, click Start -> Run and execute cmd.exe. Type in the appeared window command "ipconfig /all" (make sure that all output fits to the window). Then, without closing the window, click Parallels Destkop menu "Help"->"Report a Problem", send a problem report (it is not necessary to provide description) and post here the report ID.