DHCP issues for win xp sp2 and ubuntu

T

tw@ll

Bit poster
Hi

I'm having issues with build 5608 regarding dhcp requests. Both my Windows XP and Ubuntu 8.04 vms are having dhcp issues. I'm getting 169.x.x.x ip addresses for both vms. I've tried doing the commands suggested in an earlier thread. (echo < /Library/Parallels/.parallels_dhcp_leases and killall -HUP pvsnatd). After performing these commands I still haven't seen a change and the internet still does not work. Any suggestions?
 
lawn-128-61-116-53:~ kishoreatreya$ ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1b:63:9a:06:e0
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1c:b3:ff:fe:8d:08:ea
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:b3ff:febb:1966%en1 prefixlen 64 scopeid 0x6
inet 128.61.116.53 netmask 0xfffff000 broadcast 128.61.127.255
ether 00:1c:b3:bb:19:66
media: autoselect status: active
supported media: autoselect
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.14.163 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect
 
Switch to shared Network you are in Host - Only, and you will get IP,
Also make sure that Parallels Host-Guest adapter not disabled and DHCP is enabled in Parallels Desktop - Preferences - Network
 
You must log in or register to reply here.
Back
Top