HOWTO parallels workstation on UBUNTU INTREPID IBEX(linux HOST)

T

terlmann

Junior Member
HOWTO parallels workstation on UBUNTU

=============HOWTO Install Parallels Workstation 2.0 on Ubuntu=============
==================Updated howto version 1.2 with all commands=================
Kernel version no longer matters.
Step 1:

Download the following file to the working directory and double-click on it.
------------------------------------------------------------------------------------
Parallels-2.2.2334_2-lin-en-parallels.deb
--------------------------------------------------------------------------------------
Step 2:
parallels-config
Click to expand...
#builds files

Step 3:
Run parallels with

sudo parallels
Click to expand...
Set VM acceleration to "normal".
#Parallels will complain about "rtc" , ignore this, it is because ubuntu
doesn't have the realtime timer that parallels wants.

if Parallels says "Cannot access hypervisor!"

Issue the following command from a tty if at all possible:
cd /usr/lib/parallels/autostart/ && sudo ./drivers_stop && sudo ./drivers_start
Click to expand...
#then rerun parallels using sudo parallels. This issue may persist. Attempt to execute this command set repeatedly, and restart first. This issue has not yet been resolved.
 
Last edited:
One question, why do you sudo parallels instead of running it with your normal permissions? Otherwise looks exciting! Thank you very much for coming up with this!
 
sudo-ing

My system rarely manages to get the hypervisor and the interface communicating.
Since the hypervisor runs as root(kernel), I felt that the interface might as well do it also, which may incidentally
give a slight speed boost.
In addition, running your interface with sudo will allow your activation key to be saved into the system account, as apposed to the user account. If you decide to delete the user, the system still has the key.
 
quick_stop command not found

This is really odd.

I was able to get Parallels working yesterday just fine. However, when I tried to start it this morning I got the "Cannot start Hypervisor" error message.

When I tried you fix for it, my system told me it couldn't find quick_stop
I tried searching for quick_stop, but it's apparently nowhere on my system.

Thoughts?

Robert
 
I happened to download a copy of the entire HTML file that was here. Someone has edited the original top post removing all references to the OP's customization to get Parallels to work with Ubuntu 8.10.

As-is now, it is not possible for parallels-config to successfully compile on Ubuntu 8.10.

See the following screenscrape:

Do you accept terms of license agreement ? (Y/N)
y


Compiling Parallels Workstation 2.2 drivers...

Can not compile and/or link drivers. Read /usr/lib/parallels/doc/INSTALL
and follow instructions specified in this document.

Compilation log is available at /usr/lib/parallels/comp.log.19352.error

*** At which point I copied the supplied file and then... ***

userid@host:~/parallels-vm$ sudo parallels-config


Compiling Parallels Workstation 2.2 drivers...
Drivers have been compiled successfully.
Installing drivers...
Starting drivers...
Loading Parallels Workstation 2.2 hypervisor ...
Loading Parallels Workstation 2.2 vm-main ...
Loading Parallels Workstation 2.2 vm-bridge ...
Loading Parallels Workstation 2.2 vmvirtualnic ...
Parallels Workstation has been successfully configured

Now you can run Parallels Workstation 2.2
Issue parallels command.

Also, the OP's origional version of the post made reference to copying a file: prlnet.c via
sudo cp prlnet.c /usr/lib/parallels/drivers/drv_net/linux/prlnet.c
Such a directory does not exist.


*********************


Anyway, I tried booting a Windows 2000 VM.

1) Complaint that it could not find the /dev/rtc device
2) Keyboard input goes to the Linux command window I started Parallels with (via sudo), does the same when I start it via the program icon as my own ID. Fortunately mouse works, so I am able to shutdown the VM gracefully.

Any suggestions in either of these areas? Thanks!
 
Updates..

Mdluech, that someone is me.
I am OP and I updated my howto after taking the time to make a proper deb.

As-IS, it is possible for the config to work.
COMPLETELY REMOVE stock parallels and install my .deb.
There is no need to copy the prlnet file, it is already included in my .deb.
The included deb in my post has no license agreement, it was designed to work in deb-conf,
but I'm a horrible coder and couldn't finish it.
Anyway if someone could it would be far better to accept the license ONCE on install than 50 million times
while trying to update kernel drivers.

the /dev/rtc device is REAL_TIME_CLOCK and it doesn't exist
unless you download a special kernel. I don't recommend trying.

Your second complaint concerning keyboard input, well bud, I can't help you there
it's probably the graphics card or drivers you are using.Also check to make sure
you and root both are part of the graphics group that allows full card access.
 
OK, thanks for pointing out those things.

I have purged the previous version of Parallels and tried installing via your package. I get the following upon trying to install:

$ sudo dpkg -i Parallels-2.2.2334_2-lin-en-parallels.deb
[sudo] password for userid:
(Reading database ... 152100 files and directories currently installed.)
Unpacking parallels (from Parallels-2.2.2334_2-lin-en-parallels.deb) ...

question could not be asked
try 'dpkg-reconfigure debconf' to select a frontend other than noninteractive

dpkg: error processing Parallels-2.2.2334_2-lin-en-parallels.deb (--install):
subprocess pre-installation script returned error exit status 2
Errors were encountered while processing:
Parallels-2.2.2334_2-lin-en-parallels.deb


So what else do I need to tweak to get this to install.

Thanks!
 
Greetings terlmann

Thanks for the hard work... I think I will reload my 8.10 workstation back to 8.04. At least 8.04 is an LTS release... buys me time to convert to VirtualBox OSE I guess.
 
Hi, I am new to parallels workstation and Ubuntu but no matter what I do I just get the Hypervisor error. I have followed all instructions (except I asumend "tty" is terminal). Everything else works wonderfully in Ubunu 9.4! Do I just need to go back to Ubuntu 7.4?

Is there any help with this problem? Why can't we just turn off Hypervisor?

I am very dissapointed that there isn't more support from the Parallels team and support emails not answered, even after purchasing two keys and the intention of getting another 10 keys!

Can anyone help?
 
So I decided to go through the steps this afternoon, and it really didn't take as long as expected. Perhaps that was because I had a previous install (albeit one that didn't work).

I was so happy to see Parallels launch. HOWEVER, when I restarted my virtual machine it just sat there telling me to please wait and has been sitting on zero for a LOOONNNNGGGG time. Normally I'd kill the process and relaunch, but I'm a little nervous to do that with it being my virtual machine with all sorts of stuff I'd hate to lose.

Did you experience this too>?

Aaron
 
You must log in or register to reply here.
Back
Top