I’ve upgraded to Leopard but now I can't use shared networking

[sydbarrett74]

Mac Pro, 4GB, 4 x 2.66GHz
build 5540

• The network adapter emulation type in Configuration of the VM
RealTek 8029(AS); status Connected
• The network connection type in Mac side
Ethernet
• The information from Mac’s Terminal (/Applications/Utilities/) “ifconfig†command
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:17:f2:01:47:ae
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::217:f2ff:fe01:47af%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:17:f2:01:47:af
media: autoselect (100baseTX <full-duplex,flow-control>) status: active
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control>
fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:16:cb:ff:fe:6c:f7:b4
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:0%en2 prefixlen 64 scopeid 0x7
inet 169.254.25.197 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:00
media: autoselect status: active
supported media: autoselect
en3: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:1%en3 prefixlen 64 scopeid 0x8
inet 169.254.25.197 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:1c:42:00:00:01
media: autoselect status: active
supported media: autoselect
tun0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1280
inet6 fe80::217:f2ff:fe01:47ae%tun0 prefixlen 64 scopeid 0x9
inet6 fe80::ffff:ffff:ffff%tun0 prefixlen 64 scopeid 0x9
inet6 2001::53aa:64c:0:3fff:b84f:1597 prefixlen 32
open (pid 199)
• The screenshot of Command window with “ipconfig /all†command in the Windows side
Windows IP Configuration

Host Name . . . . . . . . . . . . : LOTHLORIEN
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Parallels Network Adapter
Physical Address. . . . . . . . . : 00-A5-76-B5-E3-ED
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IPv4 Address. . : 169.254.230.171(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled