Hi all-
I'm trying to resolve an issue where Parallels crashes. Below is a lot of information, thought I'm sure I've left something important out. I'll provide whatever additional information anyone may need including putting the log files online if that would be useful. I'll be happy to "set a breakpoint in szone_error to debug" if someone can provide me with directions. If I can't do that and the Parallels people want to provide me with a test version that can do that, I'll be happy to do that. Because I have not found other people with this issue, I feel it's likely something I've done incorrectly. I've tried a bunch of stuff and at this point I've run out of ideas. I'm willing to try just about anything, though do read all of this to see what I've already tried. Thanks in advance for any ideas!
Searching this forum for img_data_lock shows only one thread, started by me, post #7 in this thread http://tinyurl.com/2wm5wg .
In that thread the issue was low video memory. This crashing issue starts or is, at least, noticed and continues from that point.
At the end of that thread I followed the suggestion to uninstall version 5160 and install 4560. This crashing issue and the sound issue remained.
Around the end of October I noticed that the hdd files had grown to an unreasonable size and I discovered that I could not compact. On November 2nd I again uninstalled Parallels and deleted the VM and retransported the entire system, this time installing version 5160. I upgraded 5160 to 5582 on or about the 5th of December.
Searching the web for img_data_lock shows me that this string may be related to a memory leak [http://tinyurl.com/2cyzmm].
This leak may or may not have been fixed by apple, I can't tell.
It also seems that there exists a work around that doesn't leak memory [http://tinyurl.com/2762sx]
I'm not a developer. I'm pointing this out as a possible link to the issue I'm talking about here, and it's very possible that the 2 have nothing to do with each other.
I have tools version 5582 (03.12.2007) installed.
Parallels has crashed with this error 9 times from November 5th through December 15th.
Parallels crashes about 3 minutes after this error is logged in console.log:
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=4988928) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:19:23 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
~80 similar entries...
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=4284416) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:22:06 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:06 roswell crashdump[872]: Parallels crashed
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=163840) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:22:07 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:07 roswell crashdump[872]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Parallels.crash.log
Parallels Desktop 3.0 critical error! Send log file ( /Library/Parallels/bugreports/parallels-fault-042207.151107.479.log ) to reports@parallels.com
Parallels.crash.log contains, in part:
Host Name: roswell
Date/Time: 2007-12-15 04:22:05.160 -0500
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Parallels
Path: /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels
Parent: WindowServer [60]
Version: 3.0 (3.0 Build 5582.0)
PID: 479
Thread: 10
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Thread 10 Crashed:
0 <<00000000>> 0xffff0680 __bzero + 128 (cpu_capabilities.h:226)
1 ....audio.toolbox.AudioToolbox 0x93d7700c Resampler2::Reset() + 40
2 ....audio.toolbox.AudioToolbox 0x93d76fbf Resampler2Wrapper::Reset() + 67
3 ....audio.toolbox.AudioToolbox 0x93d7181a AudioConverterChain::Reset() + 38
4 ....audio.toolbox.AudioToolbox 0x93d717a2 AudioConverterReset + 80
5 ...pple.audio.units.Components 0xbd4eed87 DefaultOutputAUEntry + 23483
6 ...pple.audio.units.Components 0xbd4eecbd DefaultOutputAUEntry + 23281
7 ...pple.audio.units.Components 0xbd4eebea DefaultOutputAUEntry + 23070
8 ...pple.audio.units.Components 0xbd4e91f3 DefaultOutputAUEntry + 39
9 ...ple.CoreServices.CarbonCore 0x90cd0734 CallComponentDispatch + 34
10 ...apple.audio.units.AudioUnit 0x93e658b1 AudioOutputUnitStart + 37
11 com.parallels.desktop 0x007c0f0d 0x1000 + 8126221
12 com.parallels.desktop 0x006eb15f 0x1000 + 7250271
13 com.parallels.desktop 0x006eb8c3 0x1000 + 7252163
14 com.parallels.desktop 0x006dd000 0x1000 + 7192576
15 com.parallels.desktop 0x00422a66 0x1000 + 4332134
16 libSystem.B.dylib 0x90024227 _pthread_body + 84
Thread 10 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93d7175f ecx: 0xfffefe80 edx: 0x00000000
edi: 0x00010180 esi: 0xfcb6e590 ebp: 0xbd3a4c98 esp: 0xbd3a4c94
ss: 0x0000001f efl: 0x00010283 eip: 0xffff0680 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
parallels-fault-042207.151107.479.log contains:
Parallels Desktop 3.0 for Mac OS X version 3.0 Build 5582.0 from 2007-12-05
Received SIGBUS: Bus error
Access to fault address: 0x0
unknown signal sender: 2
In system.log I have:
Dec 15 04:19:23 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
~80 similar entries...
Dec 15 04:22:06 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:06 roswell crashdump[872]: Parallels crashed
Dec 15 04:22:07 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:07 roswell crashdump[872]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Parallels.crash.log
Dec 15 04:22:11 roswell kernel[0]: [err in VmObserverThread ] : Forced quit VM (!) id=92690384 -> ../host.Darwin/device.c:448
Information on my mac:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
System Version: Mac OS X 10.4.11 (8S2167)
Kernel Version: Darwin 8.11.1
Boot Volume: Macintosh HD
250 gig hdd
Information on the windows vitural machine:
System Information report written at: 2007-12-16 13:15:31
[System Summary]
Item Value
OS Name Microsoft Windows 2000 Professional
Version 5.0.2195 Service Pack 4 Build 2195
OS Manufacturer Microsoft Corporation
System Name CASE2
System Manufacturer Parallels Software International Inc.
System Model Parallels Virtual Platform
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 6 GenuineIntel ~2660 Mhz
BIOS Version 12/03/07
Windows Directory C:\WINNT2K
System Directory C:\WINNT2K\system32
Boot Device Not Available
Locale United States
User Name CASE2\Administrator
Time Zone Eastern Standard Time
Total Physical Memory 523,828 KB
Available Physical Memory 314,128 KB
Total Virtual Memory 1,535,152 KB
Available Virtual Memory 1,120,916 KB
Page File Space 1,011,324 KB
Page File E:\pagefile.sys
I'm trying to resolve an issue where Parallels crashes. Below is a lot of information, thought I'm sure I've left something important out. I'll provide whatever additional information anyone may need including putting the log files online if that would be useful. I'll be happy to "set a breakpoint in szone_error to debug" if someone can provide me with directions. If I can't do that and the Parallels people want to provide me with a test version that can do that, I'll be happy to do that. Because I have not found other people with this issue, I feel it's likely something I've done incorrectly. I've tried a bunch of stuff and at this point I've run out of ideas. I'm willing to try just about anything, though do read all of this to see what I've already tried. Thanks in advance for any ideas!
Searching this forum for img_data_lock shows only one thread, started by me, post #7 in this thread http://tinyurl.com/2wm5wg .
In that thread the issue was low video memory. This crashing issue starts or is, at least, noticed and continues from that point.
At the end of that thread I followed the suggestion to uninstall version 5160 and install 4560. This crashing issue and the sound issue remained.
Around the end of October I noticed that the hdd files had grown to an unreasonable size and I discovered that I could not compact. On November 2nd I again uninstalled Parallels and deleted the VM and retransported the entire system, this time installing version 5160. I upgraded 5160 to 5582 on or about the 5th of December.
Searching the web for img_data_lock shows me that this string may be related to a memory leak [http://tinyurl.com/2cyzmm].
This leak may or may not have been fixed by apple, I can't tell.
It also seems that there exists a work around that doesn't leak memory [http://tinyurl.com/2762sx]
I'm not a developer. I'm pointing this out as a possible link to the issue I'm talking about here, and it's very possible that the 2 have nothing to do with each other.
I have tools version 5582 (03.12.2007) installed.
Parallels has crashed with this error 9 times from November 5th through December 15th.
Parallels crashes about 3 minutes after this error is logged in console.log:
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=4988928) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:19:23 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
~80 similar entries...
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=4284416) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:22:06 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:06 roswell crashdump[872]: Parallels crashed
Parallels(479,0xa000d000) malloc: *** vm_allocate(size=163840) failed (error code=3)
Parallels(479,0xa000d000) malloc: *** error: can't allocate region
Parallels(479,0xa000d000) malloc: *** set a breakpoint in szone_error to debug
Dec 15 04:22:07 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:07 roswell crashdump[872]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Parallels.crash.log
Parallels Desktop 3.0 critical error! Send log file ( /Library/Parallels/bugreports/parallels-fault-042207.151107.479.log ) to reports@parallels.com
Parallels.crash.log contains, in part:
Host Name: roswell
Date/Time: 2007-12-15 04:22:05.160 -0500
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Parallels
Path: /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels
Parent: WindowServer [60]
Version: 3.0 (3.0 Build 5582.0)
PID: 479
Thread: 10
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000
Thread 10 Crashed:
0 <<00000000>> 0xffff0680 __bzero + 128 (cpu_capabilities.h:226)
1 ....audio.toolbox.AudioToolbox 0x93d7700c Resampler2::Reset() + 40
2 ....audio.toolbox.AudioToolbox 0x93d76fbf Resampler2Wrapper::Reset() + 67
3 ....audio.toolbox.AudioToolbox 0x93d7181a AudioConverterChain::Reset() + 38
4 ....audio.toolbox.AudioToolbox 0x93d717a2 AudioConverterReset + 80
5 ...pple.audio.units.Components 0xbd4eed87 DefaultOutputAUEntry + 23483
6 ...pple.audio.units.Components 0xbd4eecbd DefaultOutputAUEntry + 23281
7 ...pple.audio.units.Components 0xbd4eebea DefaultOutputAUEntry + 23070
8 ...pple.audio.units.Components 0xbd4e91f3 DefaultOutputAUEntry + 39
9 ...ple.CoreServices.CarbonCore 0x90cd0734 CallComponentDispatch + 34
10 ...apple.audio.units.AudioUnit 0x93e658b1 AudioOutputUnitStart + 37
11 com.parallels.desktop 0x007c0f0d 0x1000 + 8126221
12 com.parallels.desktop 0x006eb15f 0x1000 + 7250271
13 com.parallels.desktop 0x006eb8c3 0x1000 + 7252163
14 com.parallels.desktop 0x006dd000 0x1000 + 7192576
15 com.parallels.desktop 0x00422a66 0x1000 + 4332134
16 libSystem.B.dylib 0x90024227 _pthread_body + 84
Thread 10 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x93d7175f ecx: 0xfffefe80 edx: 0x00000000
edi: 0x00010180 esi: 0xfcb6e590 ebp: 0xbd3a4c98 esp: 0xbd3a4c94
ss: 0x0000001f efl: 0x00010283 eip: 0xffff0680 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
parallels-fault-042207.151107.479.log contains:
Parallels Desktop 3.0 for Mac OS X version 3.0 Build 5582.0 from 2007-12-05
Received SIGBUS: Bus error
Access to fault address: 0x0
unknown signal sender: 2
In system.log I have:
Dec 15 04:19:23 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
~80 similar entries...
Dec 15 04:22:06 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:06 roswell crashdump[872]: Parallels crashed
Dec 15 04:22:07 roswell /Applications/Parallels/Parallels Desktop.app/Contents/MacOS/Parallels: img_data_lock: Cannot allocate memory
Dec 15 04:22:07 roswell crashdump[872]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Parallels.crash.log
Dec 15 04:22:11 roswell kernel[0]: [err in VmObserverThread ] : Forced quit VM (!) id=92690384 -> ../host.Darwin/device.c:448
Information on my mac:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
System Version: Mac OS X 10.4.11 (8S2167)
Kernel Version: Darwin 8.11.1
Boot Volume: Macintosh HD
250 gig hdd
Information on the windows vitural machine:
System Information report written at: 2007-12-16 13:15:31
[System Summary]
Item Value
OS Name Microsoft Windows 2000 Professional
Version 5.0.2195 Service Pack 4 Build 2195
OS Manufacturer Microsoft Corporation
System Name CASE2
System Manufacturer Parallels Software International Inc.
System Model Parallels Virtual Platform
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 6 GenuineIntel ~2660 Mhz
BIOS Version 12/03/07
Windows Directory C:\WINNT2K
System Directory C:\WINNT2K\system32
Boot Device Not Available
Locale United States
User Name CASE2\Administrator
Time Zone Eastern Standard Time
Total Physical Memory 523,828 KB
Available Physical Memory 314,128 KB
Total Virtual Memory 1,535,152 KB
Available Virtual Memory 1,120,916 KB
Page File Space 1,011,324 KB
Page File E:\pagefile.sys