Showstopper Bug: Cisco VPN

MicroDev,

Can you also dump VPN client parameters to see if its order preference is bumped too
sudo cat /Library/StartupItems/CiscoVPN/StartupParameters.plist
Which version of the client are you using?
 
serv said:
MicroDev,

Can you also dump VPN client parameters to see if its order preference is bumped too
sudo cat /Library/StartupItems/CiscoVPN/StartupParameters.plist
Which version of the client are you using?
Click to expand...

There is no CiscoVPN directory name above, but there is a /Library/StartupItems/Parallels/ directory. That contains the following:
{
Description = "Parallels VirtualMachine drivers";
Provides = ("Parallels");
OrderPreference = "First";
}
 
Oops... My mistake. Can you do
sudo cat /System/Library/StartupItems/CiscoVPN/StartupParameters.plist
then.
 
serv said:
Oops... My mistake. Can you do
sudo cat /System/Library/StartupItems/CiscoVPN/StartupParameters.plist
then.
Click to expand...

Duh, I should have thought of that... Anyway here you go:
{
Description = "Cisco Systems VPN Client Kernel Extension";
Provides = ("CiscoVPN");
Requires = ("Network");
OrderPreference = "Late";

Messages =
{
start = "Starting Cisco Systems VPN Client Kernel Extension";
stop = "Stopping Cisco Systems VPN Client Kernel Extension";
};
}

Also, to answer your earlier question, I'm using Cisco VPN 4.9.00 (0050) on the Mac side.
 
Well... Bumping OrderPreference didn't work because /LibraryStartupItems/ are executed after /System/Library/StartupItems/. I didn't have a chance to try but should have thought of that.
Anyway, adding
sleep 1
/System/Library/StartupItems/CiscoVPN/CiscoVPN restart
at the end of start function in /Library/StartupItems/Parallels/Parallels should work this time.
 
Reinstalling VPN resolves issue

At least in my case, reinstalling the Cisco client (4.9.0) fixed the problem. I had tried uninstalling/reinstalling Parallels, but that didn't work. Reinstalling the Cisco client did - I can now start the VPN and Parallels in any order I no longer get error messages from the Mac Cisco client.

On the other hand, networking in the VM is unbearably slow with the VPN up on the host, but thats a different matter.
 
I have the same issue being discussed and can try things out. this path does not exist for me:
/Library/StartupItems/Parallels/Parallels

David
 
diurnate said:
At least in my case, reinstalling the Cisco client (4.9.0) fixed the problem. I had tried uninstalling/reinstalling Parallels, but that didn't work. Reinstalling the Cisco client did - I can now start the VPN and Parallels in any order I no longer get error messages from the Mac Cisco client.

On the other hand, networking in the VM is unbearably slow with the VPN up on the host, but thats a different matter.
Click to expand...
Hmm, re-installing the Cisco client in OS X didn't do anything for me.
 
serv said:
Well... Bumping OrderPreference didn't work because /LibraryStartupItems/ are executed after /System/Library/StartupItems/. I didn't have a chance to try but should have thought of that.
Anyway, adding
sleep 1
/System/Library/StartupItems/CiscoVPN/CiscoVPN restart
at the end of start function in /Library/StartupItems/Parallels/Parallels should work this time.
Click to expand...
That did the job. Here's where I put it:
StartService() {
...

# Added per serv@parallels to fix Cisco VPN driver load order problem
sleep 1
/System/Library/StartupItems/CiscoVPN/CiscoVPN restart
}
 
I just purchased the most recent production version and now VPN does work with the same error. Tried the sugestions and still get the same error.

Amy
 
Wow, I've been using Cisco VPN 4.9.01(0030) and Shimo Version 1.0 (199) since 3188, all thru the 3.0 beta, and now with 4124, never had a hiccup.

I have found it doesn't like having both wired and wifi connections active, but that's independent of Parallels.
 
I have no trouble with 4.9.01 on my Mac and it's been working through all builds. One thing I've done ever since the NAT was introduced is to disable the "host adapter" by unchecking it under network preferences. However, that was more to allow the EVDO card I use to work with VPN than anything else - I tested and having it checked still allows the VPN to work as long as I'm using wired or wifi.
 
Yeah. I've been using beta versions until today and have no issues. Kind of wierd. All of the test versions were great and then, after it releases... bam...
 
iduff said:
Wow, I've been using Cisco VPN 4.9.01(0030) and Shimo Version 1.0 (199) since 3188, all thru the 3.0 beta, and now with 4124, never had a hiccup.

I have found it doesn't like having both wired and wifi connections active, but that's independent of Parallels.
Click to expand...

I also have never had a problem with 4.9.00 (0050) or indeed 5.0 under xp in my guest vm through any of the releases since i started with parallels back at builds in the 1800s
 
spacecowgurl said:
I completely uninstalled the latest version and VPN works now. Definitaly something with the latest version. Bummer.
Click to expand...

same here...i use cisco vpn client all the time. just installed parallels 3 and cisco stopped working. i tried reinstalling vpn client (latest version) but didn't help. i guess i'll uninstall parallels so i can get vpn working again. bummer.

don
 
You must log in or register to reply here.
Back
Top