Matt Roberts
Bit poster
Hi, Using Win XP Pro SP 3 in the latest Parallels...
At work, when i'm wired, everything works fine. At home, on the airport wireless, I can't get the internet connection to work in XP at all. I'm using bridged networking (Default adaptor). I've tried changing it to all of the device options in the bridged list (Airport, Ethernet etc).. Nothing helps. Also tried the Shared Adaptor, to no avail. Tried to "ipconfig /renew" on changing any of these settings, I get an IP address most of the time but no internet (Can't ping for example www.google.com)
Here is my ifconfig when I'm on the wireless:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether d4:9a:20:d7:9d:4e
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX <full-duplex,hw-loopback> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> 1000baseT <full-duplex,hw-loopback>
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr d4:9a:20:ff:fe:d7:9d:4e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::fa1e:dfff:fedc:cba0%en1 prefixlen 64 scopeid 0x6
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ether f8:1e:df:dc:cb:a0
media: autoselect status: active
supported media: autoselect
vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:09
media: autoselect status: active
supported media: autoselect
vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:8%vnic0 prefixlen 64 scopeid 0x7
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:08
media: autoselect status: active
supported media: autoselect
And from XP (Bridged, Airport)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Parallels Ethernet Adapter
Physical Address. . . . . . . . . : 00-1C-42-99-D9-88
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.101
Lease Obtained. . . . . . . . . . : Monday, March 29, 2010 10:05:12 PM
Lease Expires . . . . . . . . . . : Tuesday, March 30, 2010 10:05:12 PM
Can anyone help me?
At work, when i'm wired, everything works fine. At home, on the airport wireless, I can't get the internet connection to work in XP at all. I'm using bridged networking (Default adaptor). I've tried changing it to all of the device options in the bridged list (Airport, Ethernet etc).. Nothing helps. Also tried the Shared Adaptor, to no avail. Tried to "ipconfig /renew" on changing any of these settings, I get an IP address most of the time but no internet (Can't ping for example www.google.com)
Here is my ifconfig when I'm on the wireless:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether d4:9a:20:d7:9d:4e
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX <full-duplex,hw-loopback> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> 1000baseT <full-duplex,hw-loopback>
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr d4:9a:20:ff:fe:d7:9d:4e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::fa1e:dfff:fedc:cba0%en1 prefixlen 64 scopeid 0x6
inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
ether f8:1e:df:dc:cb:a0
media: autoselect status: active
supported media: autoselect
vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
ether 00:1c:42:00:00:09
media: autoselect status: active
supported media: autoselect
vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::21c:42ff:fe00:8%vnic0 prefixlen 64 scopeid 0x7
inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
ether 00:1c:42:00:00:08
media: autoselect status: active
supported media: autoselect
And from XP (Bridged, Airport)
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Parallels Ethernet Adapter
Physical Address. . . . . . . . . : 00-1C-42-99-D9-88
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.101
Lease Obtained. . . . . . . . . . : Monday, March 29, 2010 10:05:12 PM
Lease Expires . . . . . . . . . . : Tuesday, March 30, 2010 10:05:12 PM
Can anyone help me?