I have successfully installed Win98SE and all critical updates available from Microsoft. I am using Parallels build 5160. I then used Parallels Config Manager to add a second virtual hard disk (30,000 Kb). Hard Disk 2 appears on the device list; a file disk2.hdd was created in the VM directory; and a second hard disk icon appears in the frame beneath the VM desktop, Hard Disk 2 (IDE1:0), Status: connected. Yet, no disk drive letter appears in Win98 My Computer or Explorer. In MS-DOS (within Win98) if I run fdisk, there is only one hard disk listed. Any suggestions?
I would like to be in touch with serious users of Windows 98. I prefer to do most of my work (website development) in 4DOS (a well-designed MS-DOS-like command prompt) under Win98, tho I also have WinXP and OS X and VMWare. So far I have gotten the following to work in my Parallels Win98SE VM:
- External USB2 hard disk (80 Gb, FAT32) (with help from Parallels staff)
- External USB2 flash thumb (same drivers as previous item)
- Printer works
- Sound works
There are some bad devices in device manager, notably Other Devices, PCI Bridge has no driver.
I would like to be in touch with serious users of Windows 98. I prefer to do most of my work (website development) in 4DOS (a well-designed MS-DOS-like command prompt) under Win98, tho I also have WinXP and OS X and VMWare. So far I have gotten the following to work in my Parallels Win98SE VM:
- External USB2 hard disk (80 Gb, FAT32) (with help from Parallels staff)
- External USB2 flash thumb (same drivers as previous item)
- Printer works
- Sound works
There are some bad devices in device manager, notably Other Devices, PCI Bridge has no driver.