Windows 7 Networking Quit

N

no1tmorrow

Bit poster
Today I tried to connect to my network via my Bridged Connection on my Ethernet Adapter. I setup the ip do be dynamic and received the below info on it. So it is giving me valid ip address info but yet I cannot ping the network devices. I have tried a manual Ip address and it does not work either. I restored to a previous date with no luck. I tried repairing the connection. I uninstalled and reinstalled Parallel Tools. I deleted the network interface from control panel and refreshed to add it back in. I am just out of ideas at this point.

Thanks
Thom

Windows IP Configuration

Host Name . . . . . . . . . . . . : WIN-V86QHJ9A4PU
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TAP-Win32 Adapter V9
Physical Address. . . . . . . . . : 00-FF-60-3E-19-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Parallels Ethernet Adapter
Physical Address. . . . . . . . . : 00-1C-42-2A-82-C8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a441:f023:cbc4:6cbd%18(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.115(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, December 01, 2011 1:01:32 PM
Lease Expires . . . . . . . . . . : Sunday, December 11, 2011 4:01:31 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.11
DHCPv6 IAID . . . . . . . . . . . : 352328770
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-2A-2F-41-00-0C-29-20-C7-2A

DNS Servers . . . . . . . . . . . : 192.168.1.11
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{603E19C5-E950-4585-9E5B-9A633CB01A68}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{26B895C2-960A-4A08-8161-8FBF4E13FB13}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\tmorrow>
 
Just a side note if I use Airport in Bridged mode it works thus it has to do specifically with my Hard wired ethernet adapter.

Windows 7
Macbook Pro Unibody
Lion
 
To be able to function, some specifig network configuration (on switches/routers) is required. So, bridged networking is not guaranteed to work in all environments..
 
Elric,
You are correct but in this case no bridged networking is working. Here are some examples of what I mean.
1. Mac Ethernet and Parallels Ethernet set to Dynamic. Both get dynamic addresses. Mac works and Parallels doesn't

2. I am in the office and I know our network is setup like 192.168.1.1-255 - 255.255.255.0. I know that one of the servers is 192.168.1.7 and I can ping it from anywhere on the network, including my mac. I setup my bridged connection as 192.168.1.30 with a subnet of 255.255.255.0 and I cannot ping my server.

It is like the network connection is dead. Dynamic and static both fail. Only Shared works.

Please help.....

Thanks
Thom
 
Since I could not really find any info out on the net I decided to download Onyx and ran every cleaning maintenance scripts it had. It appeared to somehow fix my problem. Well at least for now.....
 
Somehow I have two logins but both are me.... Guess that is what happens when you own a work and home copy of parallels...
 
You must log in or register to reply here.
Back
Top