AutoCAD on Parallels
- Thread starter chell
- Start date
archibrat said:
I was also having the same problem with the middle button not panning, but got it working yesterday. Go to mac System Preferences, then Keyboard/Mouse settings and change the middle button to BUTTON 3. When you go back to Autocad it should now work the way you want it
Anarchytec
Bit poster
Using Revit
Heya Bomber.
PhilR here. Yep - using Revit extensively. Mac Book Pro w/ 2gb ram. One gig is allocated to Parallels. Speed is quite sufficent at lesser resolutions than full screen mode (which is not so much of an issue on 17" screen. Looking forward to MBP with possible 4gb ram.
One ongoing annoyance: the temporary dimension are **very tiny**. A new user probably wouldn't even see them. An experienced user would find having to carefully select them annoying. But maybe less annoying than having to reboot into Boot Camp.
I only reboot for large/demanding datasets. So reboot for >100mb files (WTC).
I'd suggest you set up a Boot Camp partition and then access it from Parallels. This will allow you the option of Booting into XP alone if you need a dedicated OS.
Something very interesting (and appreciated): rendering in Revit (via Parallels) means that you don't lock up your OS when you push the render button. You can actually drag/hide/minimize the Revit window in real-time while rendering. So once I start a render - I hide the view and work in OS X as if nothing is happening. OS X continues to work. I don't run full screen - so hiding Revit during rendering is trivial.
Also - running latest beta build with no issues. Coherence is nice feature. Revit icon sits in OS X dock now.
So overall - not as fast as XP alone. But quite sufficent. If the temp dimensions were resolved I could do training via Parallels. Actually submitted this issue to Parallels but have not heard back (yet).
Attached image is of 80mb project. Trying to rotate the whole project with everything open is pokey but still acceptable. Expect to Open/Close worksets selectively and create shortcuts for Hide/Isolate/Reset helps. Basically the stuff you do to work smart anyway. Otherwise - opening/creating new views is fine. Rendering 1800x2000 image took <3 minutes.
Maybe a thread in the AUGI forum for Revit<>OSX/MacIntel Hardware would be helpful as well.
And looking forward to MBP's with 4gb ram...so I can allocate more memory to Revit.
All the best -
Phil
bomberaia said:
Heya Bomber.
PhilR here. Yep - using Revit extensively. Mac Book Pro w/ 2gb ram. One gig is allocated to Parallels. Speed is quite sufficent at lesser resolutions than full screen mode (which is not so much of an issue on 17" screen. Looking forward to MBP with possible 4gb ram.One ongoing annoyance: the temporary dimension are **very tiny**. A new user probably wouldn't even see them. An experienced user would find having to carefully select them annoying. But maybe less annoying than having to reboot into Boot Camp.
I only reboot for large/demanding datasets. So reboot for >100mb files (WTC).
I'd suggest you set up a Boot Camp partition and then access it from Parallels. This will allow you the option of Booting into XP alone if you need a dedicated OS.
Something very interesting (and appreciated): rendering in Revit (via Parallels) means that you don't lock up your OS when you push the render button. You can actually drag/hide/minimize the Revit window in real-time while rendering. So once I start a render - I hide the view and work in OS X as if nothing is happening. OS X continues to work. I don't run full screen - so hiding Revit during rendering is trivial.
Also - running latest beta build with no issues. Coherence is nice feature. Revit icon sits in OS X dock now.
So overall - not as fast as XP alone. But quite sufficent. If the temp dimensions were resolved I could do training via Parallels. Actually submitted this issue to Parallels but have not heard back (yet).
Attached image is of 80mb project. Trying to rotate the whole project with everything open is pokey but still acceptable. Expect to Open/Close worksets selectively and create shortcuts for Hide/Isolate/Reset helps. Basically the stuff you do to work smart anyway. Otherwise - opening/creating new views is fine. Rendering 1800x2000 image took <3 minutes.
Maybe a thread in the AUGI forum for Revit<>OSX/MacIntel Hardware would be helpful as well.
And looking forward to MBP's with 4gb ram...so I can allocate more memory to Revit.
All the best -
Phil
Attachments
flak said:
flack - after all the years I've used Windows I'm not sure why I never thought of that! very good tip to getting rid of the double cursor...
I run an original MacBook (Core Duo not Core 2 Duo) with 2GB ram and 256MB assigned to Parallels with no issues. I do mostly 2D drafting with some 3D solids from time to time and it runs as good as the Dell Inspiron 600 it replaced, for what I need it to do. I work in construction and I have no problems opening and modifying large AutoCAD files from architects and engineers.
I mainly use Parallels for AutoCAD and Internet Explorer to access my company's Exchange webmail, since using anything else limits the webmail's features. But the speed of Parallels is completely adequate, even when I have the MacBook plugged into a 2nd display running at 1600x1200 resolution.
AutoCAD LT on Parallels
I just started using Parallels today for the first time. I'm an old-time Mac user and have, for years, been looking for a way to run AutoCAD. It did run, sort of, with Virtual PC, but it was very slow. So, I eventually bought a Windoze PC just to run AutoCAD.
Today I downloaded the latest Parallels (Build 3150), and used Transporter to convert my Virtual PC virtual machine for Parallels. The process was very straightforward, and took about 30 minutes. My VPC machine is about 10 GB, so that's not too bad. (The conversion took 2 steps: first convert the VPC machine while running in VPC on a pre-Intel Mac, transfering this to my Mac Pro, and then convert again on the Mac Pro.)
The very first thing I did was fire up AutoCAD LT 2007. The OS is Windoze XP.
Amazing. It is very fast and my years of looking for a workable Mac/AutoCAD solution are over.
This a absolutely perfect for my needs. I am a consultant, so I am not creating drawings, but I do a lot of markups and overlays (add layers) to send back to architects and other design team members. And, I don't work in 3D. My work is in churches and performing arts centers (acoustics and audio) some with multiple buildings on one campus, and some of these projects (and the AutoCAD files) are hefty.
Also, remember that this particular verision and build of Parallels is a Beta: It's only going to get better.
My setup: Mac Pro Dual-Core Intel @ 2.66 GHz, 9GB Ram, Mac OS 10.4.8
I just started using Parallels today for the first time. I'm an old-time Mac user and have, for years, been looking for a way to run AutoCAD. It did run, sort of, with Virtual PC, but it was very slow. So, I eventually bought a Windoze PC just to run AutoCAD.
Today I downloaded the latest Parallels (Build 3150), and used Transporter to convert my Virtual PC virtual machine for Parallels. The process was very straightforward, and took about 30 minutes. My VPC machine is about 10 GB, so that's not too bad. (The conversion took 2 steps: first convert the VPC machine while running in VPC on a pre-Intel Mac, transfering this to my Mac Pro, and then convert again on the Mac Pro.)
The very first thing I did was fire up AutoCAD LT 2007. The OS is Windoze XP.
Amazing. It is very fast and my years of looking for a workable Mac/AutoCAD solution are over.
This a absolutely perfect for my needs. I am a consultant, so I am not creating drawings, but I do a lot of markups and overlays (add layers) to send back to architects and other design team members. And, I don't work in 3D. My work is in churches and performing arts centers (acoustics and audio) some with multiple buildings on one campus, and some of these projects (and the AutoCAD files) are hefty.
Also, remember that this particular verision and build of Parallels is a Beta: It's only going to get better.
My setup: Mac Pro Dual-Core Intel @ 2.66 GHz, 9GB Ram, Mac OS 10.4.8
Anarchytec
Bit poster
angelo said:
Well - seems the temp dimension bug is back in 3.0 (thru latest build).
Hope this gets fixed soon. As is with V3, using Revit is fairly untenable in Parallels.
Back to Boot Camp....
-Phil
lucerodesign1
Bit poster
Running AutoCAD LT 2008 - OK, mostly
I've been running AutoCAD LT on my MBP since January and it's been relatively smooth sailing. The new version of parallels is much better, but I noticed a problem this morning.
I updated to LT 2008 last month and just today started using it in coherence mode. I could not execute the XREF command to manage my external references. I would get a fatal error and AutoCAD would quit. I tried purging, auditing, etc..., but nothing helped, then I tried several other projects and got the same results. Problem with AutoCAD? No, it all worked fine when I went to fullscreen. I'll post on the Autodesk forum as well to see if this is an update that Autodesk can provide. Thankfully there's an easy work around.
Oh and by the way, you can never have too much RAM, especially in a notebook.
I've been running AutoCAD LT on my MBP since January and it's been relatively smooth sailing. The new version of parallels is much better, but I noticed a problem this morning.
I updated to LT 2008 last month and just today started using it in coherence mode. I could not execute the XREF command to manage my external references. I would get a fatal error and AutoCAD would quit. I tried purging, auditing, etc..., but nothing helped, then I tried several other projects and got the same results. Problem with AutoCAD? No, it all worked fine when I went to fullscreen. I'll post on the Autodesk forum as well to see if this is an update that Autodesk can provide. Thankfully there's an easy work around.
Oh and by the way, you can never have too much RAM, especially in a notebook.
irelandshope
Junior Member
I'm having a similiar problem with Architectural Desktop 2006. If I launch ADT by double clicking on a dwg file which will launch parallels and then Autocad in coherence it will crash after a few seconds. However if I launch Autocad first in windowed mode and then open the file no problem. I can also switch to coherence and again no problem. It seems strange.
I tried your problem with xrefs but could not cause a fatal error.
I tried your problem with xrefs but could not cause a fatal error.
husnainlotia
Bit poster
Autocad
When I switch to full screen running AutoCAD, I get a marked loss of display quality. Any suggetions?
When I switch to full screen running AutoCAD, I get a marked loss of display quality. Any suggetions?
Same here
Same issue here. Opening the properties dialog, xref dialog ... basically any of those "floating" dialogs results in an access violation and crash:
FATAL ERROR: Unhandled Access Violation Reading 0x0002 Exception at 2h
This only happens in Coherence mode, but is completely reproduceable. Full screen and OS window work fine. From the Autodesk crash report, I get the following info (which may be of use):
<OpenGLInfo Vendor="Parallels Inc. & ATI Technologies Inc." Renderer="ParallelS over ATI Radeon X1600 OpenGL Engine" Version="2.0 ATI-1.4.56" />
<GraphicsInfo InfoType="D3D9Config">
<![CDATA[ Driver: PrlVideo.dll
DriverVersion: 3.0.4128.0
Description: Parallels Video Driver
DeviceName: \\.\DISPLAY1
VendorId: 6840
DeviceId: 4401
SubSysId: 0
Revision: 0
WHQLLevel: 0
DeviceType: 0
AdapterOrdinal: 0
Caps: 0
Caps2: 0
Caps3: 0
Presentation: 0
Cursor: 0
Dev: 0
PrimitiveMisc: 0
Raster: 0
ZCmp: 0
SrcBlend: 0
DestBlend: 0
AlphaCmp: 0
Shade: 0
Texture: 0
TextureFilter: 0
CubeTextureFilter: 0
VolumeTextureFilter: 0
TextureAddress: 0
VolumeTextureAddress: 0
Line: 0
MaxTextureWidth: 0
MaxTextureHeight: 0
MaxVolumeExtent: 0
MaxTextureRepeat: 0
MaxTextureAspectRatio: 0
MaxAnisotropy: 0
MaxVertexW: 0
GuardBandLeft: 0
GuardBandTop: 0
GuardBandRight: 0
GuardBandBottom: 0
ExtentsAdjust: 0
Stencil: 0
FVF: 0
TextureOp: 0
MaxTextureBlendStages: 0
MaxSimultaneousTextures: 0
VertexProcessing: 0
MaxActiveLights: 0
MaxUserClipPlanes: 0
MaxVertexBlendMatrices: 0
MaxVertexBlendMatrixIndex: 0
MaxPointSize: 0
MaxPrimitiveCount: 0
MaxVertexIndex: 0
MaxStreams: 0
MaxStreamStride: 0
VertexShaderVersion: 0
MaxVertexShaderConst: 0
PixelShaderVersion: 0
PixelShader1xMaxValue: 0
Dev2: 0
MasterAdapterOrdinal: 0
AdapterOrdinalInGroup: 0
NumberOfAdaptersInGroup: 0
DeclTypes: 0
NumSimultaneousRTs: 0
StretchRectFilter: 0
VertexTextureFilter: 0
MaxVShaderInstructionsExecuted: 0
MaxPShaderInstructionsExecuted: 0
MaxVertexShader30InstructionSlots: 0
MaxPixelShader30InstructionSlots: 0
]]>
</GraphicsInfo>
abhayos said:
Same issue here. Opening the properties dialog, xref dialog ... basically any of those "floating" dialogs results in an access violation and crash:
FATAL ERROR: Unhandled Access Violation Reading 0x0002 Exception at 2h
This only happens in Coherence mode, but is completely reproduceable. Full screen and OS window work fine. From the Autodesk crash report, I get the following info (which may be of use):
<OpenGLInfo Vendor="Parallels Inc. & ATI Technologies Inc." Renderer="ParallelS over ATI Radeon X1600 OpenGL Engine" Version="2.0 ATI-1.4.56" />
<GraphicsInfo InfoType="D3D9Config">
<![CDATA[ Driver: PrlVideo.dll
DriverVersion: 3.0.4128.0
Description: Parallels Video Driver
DeviceName: \\.\DISPLAY1
VendorId: 6840
DeviceId: 4401
SubSysId: 0
Revision: 0
WHQLLevel: 0
DeviceType: 0
AdapterOrdinal: 0
Caps: 0
Caps2: 0
Caps3: 0
Presentation: 0
Cursor: 0
Dev: 0
PrimitiveMisc: 0
Raster: 0
ZCmp: 0
SrcBlend: 0
DestBlend: 0
AlphaCmp: 0
Shade: 0
Texture: 0
TextureFilter: 0
CubeTextureFilter: 0
VolumeTextureFilter: 0
TextureAddress: 0
VolumeTextureAddress: 0
Line: 0
MaxTextureWidth: 0
MaxTextureHeight: 0
MaxVolumeExtent: 0
MaxTextureRepeat: 0
MaxTextureAspectRatio: 0
MaxAnisotropy: 0
MaxVertexW: 0
GuardBandLeft: 0
GuardBandTop: 0
GuardBandRight: 0
GuardBandBottom: 0
ExtentsAdjust: 0
Stencil: 0
FVF: 0
TextureOp: 0
MaxTextureBlendStages: 0
MaxSimultaneousTextures: 0
VertexProcessing: 0
MaxActiveLights: 0
MaxUserClipPlanes: 0
MaxVertexBlendMatrices: 0
MaxVertexBlendMatrixIndex: 0
MaxPointSize: 0
MaxPrimitiveCount: 0
MaxVertexIndex: 0
MaxStreams: 0
MaxStreamStride: 0
VertexShaderVersion: 0
MaxVertexShaderConst: 0
PixelShaderVersion: 0
PixelShader1xMaxValue: 0
Dev2: 0
MasterAdapterOrdinal: 0
AdapterOrdinalInGroup: 0
NumberOfAdaptersInGroup: 0
DeclTypes: 0
NumSimultaneousRTs: 0
StretchRectFilter: 0
VertexTextureFilter: 0
MaxVShaderInstructionsExecuted: 0
MaxPShaderInstructionsExecuted: 0
MaxVertexShader30InstructionSlots: 0
MaxPixelShader30InstructionSlots: 0
]]>
</GraphicsInfo>
AutoCAD 2008 - 3.0
I've read a few posts from ages ago but it seems still no fix for AutoCAD2008. I just unfortunately upgraded to 3.0 and my mouse is going crazy. Lack of all control from the mouse but the touchpad it's fine which sucks to draft with. I diasabled the synchronization and saw no improvement at all. Any other tips out there?
I've read a few posts from ages ago but it seems still no fix for AutoCAD2008. I just unfortunately upgraded to 3.0 and my mouse is going crazy. Lack of all control from the mouse but the touchpad it's fine which sucks to draft with. I diasabled the synchronization and saw no improvement at all. Any other tips out there?